．＆㈤㈩㈨Ⅲ㈧Ⅵ＃㈤㈨Ⅴ②
l) Do not expose the LCD panel to direct sunlight. Lightproof shade etc. should be attached when LCD panel is
used under such environment. The panel characteristic might be deteriorated and the display fineness
decrease when strong light is irradiated to the liquid crystal panel.
m) When handling LCD modules and assembling them into cabinets, that long-terms storage in the environment
of oxidization or deoxidization gas and the use of such materials as reagent, solvent, adhesive, resin, etc.
which generate these gasses, causes corrosion and discoloration of the modules. Therefore, please avoid these
use. Epoxy resin (amine series curing agent), silicone adhesive material (dealcoholization series and oxime
series), tray forming agent (azo compound) etc, in the cabinet or the packing materials may induce abnormal
display with polarizer film deterioration regardress of contact or noncontact to polarizer film. Be sure to
confirm the component of them.
n) If it is kept at a temperature below the rated storage temperature, it becomes coagulated and the panel may
be broken. Also, if it is kept at a temperature above the rated storage temperature, it becomes isotropic liquid
and does not return to its original state. Therefore, it is desirable to keep it at room temperature as much as
possible.
o) The LED used for this product is very sensitive to the temperature. Luminance decreases rapidly when it
issued for a long time under the environment of the high temperature. Please consult our company when it is
used under the environment like the above mentioned.
p) Be careful when using it for long time with fixed pattern display as it may cause afterimage. (Please use a
screen saver etc., in order to avoid an afterimage.)
q) Notice:Never dismantle the module , because it will cause failure. Moreover, please do not peel off the tapes
other than the creped paper tape (yellow tape) of
a protection film pasted to the product.
r) If a minute particle enters in the module and adheres to an optical material, it may cause display non-
uniformity issue, etc. Therefore, fine-pitch filters have to be installed to cooling and inhalation hole if you
intend to install a fan.
s) Observe general precautions for all electronic components.
t) VCOM must be adjusted on condition of your final product. No adjustment causes the deterioration for display
quality.
相关PDF资料
相关代理商/技术参数
LQ035Q7DB06
功能描述:TFT 显示器 & 附件 3.5" 320x240 QVGA w/Touch
RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装:
LQ035Q7DH01
功能描述:LCD TFT 3.5" 240X320 QVGA RoHS:否 类别:光电元件 >> 显示器模块 - LCD，OLED，图形 系列:- 标准包装:1 系列:* 其它名称:Q7143510
LQ035Q7DH02F
制造商:Sharp Microelectronics Corporation 功能描述:LCD DISPLAY RGB 240X320
LQ035Q7DH03
制造商:Sharp Microelectronics Corporation 功能描述:LCD DISPLAY RGB 240X320
LQ035Q7DH06
功能描述:TFT 显示器 & 附件 3.5" 240x320 225 nits w/Touch RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装:
LQ035Q7DH07
功能描述:TFT 显示器 & 附件 3.5" TFT QVGA 240x320 225 nit
RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装:
LQ036Q1DA01
功能描述:TFT 显示器 & 附件 3.6" TFT QVGA Landscape 320x240
RoHS:否 制造商:Sharp Microelectronics 产品:Displays 对角线:1.35 in 分辨率:96 x 96 模块大小 - 宽x高x厚:28.2 mm x 32.34 mm x 1.4 mm 观察区域 - 宽x高:24.192 mm x 24.192 mm 附加的触摸屏:No 接口:Serial 背光: 背景色: 电源电压:3 V 工作电流: 工作温度范围:- 10 C to + 60 C 封装: